Allow Destinations To Created Gateway

 

Now, we have completed adding gateway and providing technical information of the gateway.Only one thing left is, which destinations are supported by this gateway. Any specific gateway can terminate one or more destination. Or you might want this gateway will terminate only one destination. You can control destinations by following steps below.

• If you are at the same page after adding technical information to the gateway, click on the destinations tab that appears in front of you, and then Add Destination. If you already have left that page, browse Termination >> Gateway >> All Gateway and locate the gateway we have added. Click on the name of the gateway and click destinations tab and Add Destination from there. The page will look like the above image.
• Provide appropriate information in specified fields

Destination	This field is an auto complete field, put first few digit of your desired destination code, it will automatically suggest available codes. Example is in the image above, I have putted 880 on the field and it have suggested me all codes available starting with 880. Select the desired code with mouse and click on that.
Remove Prefix	If you are receiving call with a prefix, i.e. 2228801xxxxxxxxx where 222 is technical prefix, you can remove this prefix from here. If you put 222 as remove prefix, it will strip 222 and send the call to the gateway as 8801xxxxxxxxx.
Out Prefix	This is the opposite of Remove prefix. If you put 333 on the box as out prefix, it will add 333 with the called number and send to the Gateway.
Add Breakout	Breakout are sub codes for a destination, for example 880 is country code for Bangladesh, and Bangladesh have many other codes like 8801 Bangladesh Mobile, 8802 Bangladesh Dhaka etc. 8801 and 8802 is breakout for 880. If you set yes, it will add all codes to the gateway started with the specified code, on this example 880. Set it no for now.
Auto Routing	You can add this gateway directly to a routing group by selecting the Auto Routing yes and selecting the routing group on next step where you want to put routing entries for this gateway. Select Yes here.
Routing Groups	This is a scrawl menu from where you can select the routing group we have created in previous section. Make sure you click on the name and it is highlighted. By selecting the routing group name, you are ensuring that current gateway will be enlisted under that specified routing group for the destination(s) we have selected.

•  After filling up the form, click on Add Destination Button.